Easter Banner
Supplies: My design to make your cutouts.Etsy My shopWood or other thick material to cut out your design. You could also use thick cardstock, kraft paper, cardboard, and many other…
Supplies: My design to make your cutouts.Etsy My shopWood or other thick material to cut out your design. You could also use thick cardstock, kraft paper, cardboard, and many other…
Supplies: Wood (you could use other materials. See paragraphs below for more suggestions for alternative materials)Wood glueGlue stickHot glue gun and glueFoil flakes in silver and rose goldRibbonCardstockMy design, which…
Supplies for Cricut method: Cardstock (medium to thick) You could also use vinyl for the layer that covers the spacer.AcetateCraft foam, kraft board, or thin cardboard. Something to use as…
Supplies for Glowforge method: Wood or draft woodWood glue. Other glues will also work. Filler for your shaker: glitter, sequence, foam balls, and confetti, or other small things to put…
Supplies: Long piece of wood. My piece of wood was a piece of scrap wood from my dad. It is about 7 ¼ inches wide and 45 ¼ inches tall. You…
For Halloween I made a witch hat shaker out of cardstock with my Cricut, which you can find the link to here. So, this time I decided to use my…
Supplies for 3D Nativity: paintpaint brusheswood cutout set from Dollar Tree. The Nativity I bought from Dollar Tree is very easy to assemble. You simply slide the wood places into…
Story Our story begins when I was very little, my mom would take me to our local library. There I meet a very nice Japanese librarian that love to make…
Supplies: Wood backing. I just used some crap wood I had on hand. Paint Paint brushes Glue. I used Elmer's glue, but wood glue would also work well Painter's tape My…
I used Inkscape to help me make this piece. I then used my Glowforge, a laser printer, to cut out my pieces. The pieces on the inside will be cut out,…